ZK-TK500
- Blocking width from 2m to 6m
- Blocking height of spikes above surface level: 550mm
- Electromechanical operation
Electromechanical tire killer is one of the most high-end vehicle access control products to prevent vehicle intrusion.
Drive unit is placed into one end of the tire killer and the product is installed above ground level. Its “one- piece” design is aimed to achieve smooth transmission of motion as well as minimize the effect of external factors.
To operate this device, you just need to use the remote controller to raise the spikes and it will be raised within 2 seconds for blocking vehicles in the single directional driveway.
- Electromechanical operation
- Blocking width from 2m to 6m
- Blocking height of spikes above surface level: 550mm
- Loop detector is provided for safety
- Manual operation in case of power failure
- The solid blocking spikes are 10 mm thick and welded to the solid rotation axis at a distance of approx. 150mm to each other
| Material | A3 Steel |
| Material thickness | 12 / 14 / 16mm |
| Surface treatment | Painted with reflective strip |
| IP rate | IP67 |
| Surface treatment | Black and yellow |
| Length | Customizable |
| Width | 550mm |
| Height | 85mm |
| Max. loading weight | 80t |
| Weight | 0.3t (Standard) |
| Spike height | 150mm |
| Spike thickness | 12mm |
| Drive mode | Electromechanical |
| Working environment | -40 °C ~ +70°C |
| Control mode | Short range wireless remote control / drive-by-wire |
| Control distance | ≤100m |
| Remote control distance | Within 50m |
| Raising / Lowering time | ≤1~2s |
| Power supply | 220V electric drive |
| System dynamic power | 180W |
